Skip to content

Limonfy Guard

Protection where there is no power and no connection.

Autonomous monitoring towers with AI cameras, detectors, a siren and solar power, managed from one platform. The towers are made by our partner and Limonfy provides the platform: every tower watches its own energy budget, and an alarm with a clip goes straight to the operator.

// Tower W-07 · Limonfy Guard

person · 97 %
tower W-07 · image detection

    Platform preview — demo data

    AI camerasEdge AIPIR detectorsSirenLEDPV + batteriesGSM/LTEMesh

    Site protection

    A site without power is a site without protection. Until now.

    Construction sites, car parks and storage yards rarely have power and connectivity. A security agency or permanent monitoring is expensive, and an ordinary camera without power stops working after a few days.

    Today

    With Limonfy Guard

    Guards or a camera that depends on mains power

    A solar-powered tower that works on its own

    False alarms from animals and moving trees

    Cameras with image analysis distinguish people and vehicles

    Every device in a separate app

    The whole tower fleet on one map and in one panel

    No idea how long the tower will last

    Autonomy forecast and automatic power-saving modes

    Modules

    Everything a tower in the field needs.

    AI cameras

    4 cameras, person and vehicle detection, recording to an SD card, a clip as alarm evidence.

    Detectors and outputs

    PIR detectors, siren, LED beacon (green OK, flashing red on alarm), manual and rule-based control.

    Energy

    PV output, battery state, consumption of every device, autonomy forecast.

    Operating modes

    Normal, Eco, Survival: when the battery runs low, the tower reduces consumption by itself while keeping key detection.

    Connectivity

    GSM/LTE to the platform and a mesh network between towers, relaying events where coverage is weak.

    Monitoring station

    Alarms via SIA DC-09 / Contact ID / REST to the security agency’s station.

    In development

    How it works

    From detector to response.

    01

    Detection

    A PIR detector and a camera with image analysis confirm that it is a person or vehicle.

    02

    On-site response

    Siren, red beacon and clip recording.

    03

    Alarm

    The event with a clip reaches the platform and the operator within seconds.

    04

    Fleet management

    The operator sees all towers, their energy and connectivity, and changes settings remotely.

    Who it is for

    For sites that cannot be guarded the traditional way.

    Construction sites

    Protection of equipment and materials, also at night and at weekends.

    Car parks and storage yards

    Sites without electrical infrastructure.

    Security agencies

    A tower fleet in one panel; connection to your own monitoring station in development.

    Events and temporary sites

    Quick set-up and relocation.

    Energy

    A tower that knows its energy budget.

    • Every active device shows its consumption and impact on autonomy
    • Rules: switching off less important detectors when the battery runs low
    • Running on PV or on 230 V mains when available

    Limonfy Platform

    One platform for the whole fleet

    Status, alarms, energy, connectivity and configuration of all towers in one place, with roles for operator, service and administrator.

    From our projects

    Where Limonfy Guard works.

    Partner towers with Limonfy Platform

    Our partner builds autonomous towers, Limonfy provides the fleet management platform: cameras, detectors, energy and connectivity. The first towers are already equipped with our technology; deployment is under way.

    Edge AI

    Image analysis directly in the tower’s cameras: person and vehicle recognition without sending video streams, saving energy and data transfer.

    We present implementation details in a meeting.

    Questions and answers

    Before you ask.

    How long does a tower run without sun?

    It depends on configuration and weather. The platform calculates the autonomy forecast continuously and switches the tower to power-saving mode when needed.

    Does the tower work with our monitoring station?

    Integration with monitoring stations (SIA DC-09, Contact ID, API) is in development. Today, alarms with clips go to the platform and to designated operators.

    Is camera video streamed all the time?

    No. We send events and clips, and you start the live view when you need it.

    Can the towers be rented?

    Yes. Together with our partner we offer towers for sale and for rent, with Limonfy Platform included.

    Can a tower be moved?

    Yes, it is a mobile solution. After relocation, the configuration stays in the platform.

    Site assessment

    Show us the site. We’ll propose how many towers and where.

    Based on a site map and your requirements, we will prepare tower placement, alarm scenarios and the connection to the monitoring station.

    1. 01Site and risk analysis
    2. 02Tower placement and camera coverage
    3. 03Alarm scenarios and station integration
    4. 04Pricing for purchase or rental (together with our partner)

    Write to us

    hi@limonfy.com

    Click the button and your e-mail app will open with a ready-made message template. Fill in a few lines and send.

    In your message, include:

    • Full name
    • Company
    • Industry
    • Number of locations
    • What you want to solve
    Send a site description

    We reply within 12 hours.

    Prefer to talk?

    +48 792 355 613

    The data in your message is controlled by LIMONFY sp. z o.o. We process it to respond to your enquiry (Art. 6(1)(b) and (f) GDPR). You have the right to access, rectify and erase your data and to object. Details: privacy policy.